Assembled Ignition Wire Conduit Kits
Threading ignition wires through the original-type center conduit and installing spark-plug ends is a fairly tedious task that many owners simply don't want to tackle, so we've done all the work for you with our ready-to-install ignition wire conduits. Simply remove two cylinder head hold-down nuts, install the conduit, attach the wires and you're ready to go. We use top-quality 7mm plain black wire and original-type straight or right-angle spark plug ends as per original. We even include the correct rubber boots (where applicable) for the spark plug and distributor cap terminals.

NEW Shift Boot Clamp
Missing from virtually every XK, this special clamp retains the top of the shift boot to the shift lever.
16-1550
$10.95

NEW XK-140 XK-150 Alloy Fuel Tank
Made by the same UK folks who supply our steel tanks. Lighter and, well, who can resist the cool factor of nicely fab'd alloy?
03-0091A
$718.62

NEW XK-120 Inner Headlamp Ring
Now manufactured by XKs Unlimited. While the quality of UK reproductions of this item was very good, the price was astronomical - when we could get them. We've brought the pricing back down to earth. This is the 7" version for USA-specification headlamps. Introductory sale price.
16-0041
$89.95 each

NEW Stickers and Plates for XKs
Take your XK restoration to the next level with some of our new stickers and plates. Imported from the UK.

New Book! Jaguar XK-120 in Detail
This is a stunning new book published in conjunction with the Jaguar Daimler Heritage Trust and written by its chief archivist. The book jacket perhaps says it best: "The definitive history of Jaguar's world-beating XK-120, complete with in-depth technical descriptions, specially commissioned colour photography, rare archive pictures, competition history and details of prototypes, record breakers, works cars and special-bodied versions." If you have only one XK-120 book in your library, make it this one.
Part #: 11-9106
$59.95

Pertronix Ignitor® Kits
You've asked for them and here they are. We are now fully stocked on the popular Pertronix Ignitor® ignition conversion kits. They eliminate troublesome breaker points forever with an incredibly neat magnetic pick-up that's fully contained within the distributor cap for a "no one will ever know" installation. Available for standard cars and for positive ground cars that have been converted to negative ground. To get the most of the Ignitor kits, also purchase the appropriate matched coil.

NEW! Water Outlet Gasket for XK-120
Now made by XKs Unlimited in the USA from top-quality gasket material. Our price is now lower as well.

Part #: CO-2380
$8.95

NEW! Brake Shoe Sets for XK-120 and XK-140
Shops capable of re-lining brake shoes are scarce. Due to environmental laws, most can no longer properly shape the new lining to the radius of the drum, which often results in only a fraction of the lining making contact with the drum and correspondingly poor braking performance. These shoe sets are brand new, not relined, and are of the proper radius. What's more, the friction material is meant for cars, not trucks (as is commonly used when re-lining Jaguar brake shoes because of their somewhat odd size) and while it's probably not up to the rigors of racing, you should notice a huge improvement in your street-driven Jaguar's stopping ability.

Part #: JA-35130
$179.95/Axle Set

NEW! XK-120 Steering Box Bearing Races
Manufactured by XKs Unlimited in the USA from heat treated steel, these are excellent, life-time parts. Three-piece set.

Part #: 14-5427
$94.48

XK-120-140-150 Sump Plug
Manufactured by XKs Unlimited, this filter/drain plug fits all XK-120, XK-140 and XK-150. We've improved the quality and reduced the price!

Part #: CO-990
$65.00

NEW! Early-Style XK-120 "Side Entry" Distributor Cap
We now have in stock the "Horizontal Outlet" (to quote Jaguar parlance) distributor cap as originally fitted to early XK-120s up to engine W.6696, or prior to November, 1952. Very nice quality reproductions.

Part #: LU-415708
$64.95

New! Lucas-Style XK-120 Battery
Made in the USA from top-quality components, these are the most-original-looking batteries available for the XK-120. They feature correct "LUCAS"-embossed caps and cases plus a non-sticky but original-appearing PolyTar® top. (We will continue to stock our "fit and function" version of the XK-120 battery under part number CO-2767/X.) Two required; sold per each.

Part #: CO-2767
$175.00 each

NEW! XK-120 Tonneau Cover
One of the key advantages XKs Unlimited enjoys over its competitors is our restoration and service shop. If a part doesn't fit or is of poor quality, you can bet our purchasing and product development managers will hear about it in short order. We can then work directly with our suppliers to improve a product. Case in point is our new XK-120 tonneau; our trimmers requested some subtle but important changes, not the least of which was locating the steering wheel pocket properly. We also revised the mounting system: two Tenax fasteners (part number 19-3227; not included) replace two of the screws in the windshield pillars, and two threaded Lift-The-Dot studs (part number 19-3225, not included) replace the two rear-view-mirror mounting screws. With this system, no holes must be drilled to mount the front of the tonneau. The rear is mounted via snaps or Lift-the-Dot fasteners (included).

Our goal with this kit was to replicate XK-150 front disc brakes for the XK-120 and XK-140 -- not to create a monster kit with red-painted, six-pot, calipers gripping rotors the size of a medium pizza. The photo tells the story, but this is the most complete kit in the industry, with all the required hardware included, not to mention new splined hubs, rotors, disc brake cylinders, hoses, etc., etc. For single or dual master cylinder, but wire wheel cars only. Kit does not include brake pipes from master cylinder to flex lines, which are easily fabricated using materials available at just about any auto parts store. Bring decent brakes to your XK-120 or XK-140!
$2249.95

These kits include all the wear items required to put your XK-140 or XK-150 steering rack back to virtually "as new" condition, including all bearings, bushings, lock tabs, seals, tie rod ends, bellows and rack mounts. The XK-140 kit does not include the spring-loaded plunger (C14002). However, the XK-150 piece can be purchased separately and modified to fit.
$308.18

NEW Door Hinge Shims for XK-120 and XK-140
Essential for proper door alignment. Manufactured by XKs Unlimited.

Now manufactured by XKs Unlimited, these are for later XK-120s with the dual master cylinder (and automatically adjusting front brakes) and all XK-140.
Four required per car.
$28.53

Now manufactured by XKs Unlimited, these are for early XK-120s with the single master cylinder and manually adjusted brakes.
Four required per car.
$18.09

More handy kits from XKs Unlimited. These its include distributor cap, plug lead set, lead separators, ignition wire conduit and correct "Champion" plug ends -- all at a substantial savings over purchasing the items separately.

XK-120 Early
Part #: 08-1500
$157.95

XK-120 Later, XK-140
Part #: 08-1502
$179.95

XK-150
Part #: 08-1504
$179.95

XK Sports Cars
From the Ludvigsen Library Series, "Jaguar XK120, XK140, XK150 Sports Cars" is a collection of photographs from the veteran journalist's vast collection. Ludvigsen does provide a brief introduction to the various Jaguar XKs, but it's the period photographs of XK prototypes, show cars and racing and rallye machines that tell the story and "give an intimate portrait of the sports cars that raised the bar for Jaguar's opposition and cemented the company's reputation for fast, stylish cars that were also remarkably affordable." 128 pages.

Part #: 11-9076
$34.42

For direct sales, please contact XKs Unlimited TOLL-FREE at 1-800-444-5247.

For more New and Hot parts, click here!